Cart
0
Channel Staircase LED Motion Sensor DC12V/24V Light Avoid-Short Circuit Controller Stair Light Night Lights Replacement Kit
Free Standard Shipping Across USA
WELCOME5: Use code WELCOME5 for 5% off on your first order
Couldn't load pickup availability
Vendor: Lightsdaddy
Type:
Sku: 1005008888050788-China Mainland
Availability: In Stock
Sold by LightsDaddy, an authorized reseller.
Returns accepted within 30 days | support@lightsdaddy.com
Shipping Information
- Free Standard Shipping — United States only
- Processing Time: 3–5 business days
- Estimated Delivery: 6–10 business days after dispatch
- Securely packed to protect your lighting fixtures during transit
- Tracking number sent via email once dispatched
- Orders over $250 require signature upon delivery. Taxes calculated at checkout.
Returns & Refund
Returns accepted within 30 days of delivery.
Damaged or Defective Item
Free return shipping + replacement or full refund
Wrong Item Received
Free return shipping + replacement or full refund
Change of Mind
Return shipping at customer's expense · Item must be unused & in original packaging
All returns require a Return Authorization (RA) number before sending.
View Full Return & Refund Policy
Safety & Compliance
⚠️
California Proposition 65 Warning
Some products sold on this website may expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
www.P65Warnings.ca.gov
⚡
Electrical Safety Warning
All electrical products must be installed by a qualified electrician in accordance with local wiring regulations. Incorrect installation may result in fire, electric shock, or injury.
Always disconnect power at the circuit breaker before installation.
💡
Bulb & Usage Advisory
Do not exceed the maximum wattage specified on the fixture label. Keep away from flammable materials. Allow adequate ventilation around the fixture.
Keep out of reach of children. Not suitable for wet locations unless rated IP65 or higher.
Guarantee safe checkout
Channel Staircase LED Motion Sensor DC12V/24V Light Avoid-Short Circuit Controller Stair Light Night Lights Replacement Kit - China Mainland
$30.09
SPECIFICATIONS
Brand Name: NONE
High-concerned chemical: none
Is Smart Device: no
Item Type: RGB controler
Material: ABS
Model Number: LED Motion Sensor
Origin: Mainland China
Power Source: DC
TYPE 1: Controller
TYPE 2: For Channel
TYPE 3: For Staircase
Voltage: 12-24v
Features:
Product precautions:
1. This product uses low-voltage DC 12V-24V to work, and must be connected to a switching power supply. It is prohibited to directly connect to 220V, otherwise the controller may be damaged. 2. The input port has polarity (positive and negative), and reverse connection is prohibited. The wiring operation should be performed in a power-off state. After the wiring is completed, the installation and lighting connection should be checked for correctness before powering on. If the DC voltage wiring or lighting installation is incorrect, a short circuit may occur, causing the controller to malfunction. 3. This product is only suitable for use in a dry indoor environment. Strong wind, high temperature or severe vibration may cause sensor failure.
4. The sensing angle is 120 degrees, the sensing distance is 1-3 meters, and the sensor is most sensitive when facing people 5. AB sensing heads should be arranged according to the site settings.
Additional operating instructions:
1. If the AB sensors are triggered simultaneously within 6 seconds, the light strip will run inward from both ends. If the AB sensors are triggered continuously for more than 6 seconds, the light strip will preferentially run in the direction of the first triggered sensor
2. Set the light chasing time:
3. Single, double, three, four, five
4. If the induction continues during the delay period, the light strip remains on = the total time from A to B + delay time.
5. Short circuit protection device: In the short circuit state, the status indicator light will flash.
Connection way:
Insert the LED light strip into the control port corresponding to the stair steps in turn for connection. For example:
> Step 1, the positive pole of the lamp into the [orange] terminal marked with number 1, and the negative pole into the [green] terminal marked with number 1;> Step 2, the positive pole of the lamp into the [orange] terminal marked with number 2, and the negative pole into the [green] terminal marked with number 2; Step 3, the positive pole of the lamp into the [orange] terminal marked with number 3, and the negative pole into the [green] terminal marked with number 3; ... and so on.
The control host has 32 ports, please connect the required light strips in according to actual needs. Unused ports can be ignored. If necessary, you can add additional light strips later.
Operation instructions:
Long press [Key 1] for 4 seconds: Enter the mode of setting the number of stepping lights. Then short press [Key 1] to light up indicator from "1-32". Select the desired number of stepping light channels according to the lighted indicator, and then long press [Key 1] again or wait for 5 seconds to save the setting.
Short press [Key 1]: Switch between 5 lighting modes. Select the desired mode according to the indicator display.
Short press [Key2]: Select constant light duration: 10s-20s-40s-80s-100s. "Long press [Key2] for 4 seconds: Enter stair light brightness selection mode. Then short press [Key2] to select brightness level: "10%-20%-40%-60%-100%." Long press [Key2] again or wait for 5 seconds to save the setting.
Short press [Key3]: Set stair light flow speed, time options: "0.3s-0.5s-0.8s-1.0s-1.2s. ”
No key activity within 5 seconds: All lights will flash once, indicating that all settings have been automatically saved.
Specifications:
Part name: Staircase LED controller > Product model: UL1032
Input voltage: DC12v/24V
Sensor head: 2 (A/B)
Size: 180*85*20mm
Color: white
Material: abs
Package contents:
1 LED driver.
2 sensors.
2 output lines
Note:
1:Due to manual measurement, there may be 1-2cm error, please make sure you do not mind before ordering.
2:Due to the difference between different monitors, the image may not reflect the actual color of the item
⚠️ WARNING (California Proposition 65):
This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
For more information, please visit www.P65Warnings.ca.gov.
Customer Approved
Extensive Selection
Fast, Reliable Delivery
