Cart
0
10pcs 7W LED PCB Aluminum Plate with Lamp Beads 50mm for 7pcs 1W LED Beads Base with Lamp Beads for Lighting
Free Standard Shipping Across USA
WELCOME5: Use code WELCOME5 for 5% off on your first order
Couldn't load pickup availability
Vendor: Lightsdaddy
Type:
Sku: 32970507401-Orange 600Nm-7 Watt 50MM
Availability: In Stock
Sold by LightsDaddy, an authorized reseller.
Returns accepted within 30 days | support@lightsdaddy.com
Shipping Information
- Free Standard Shipping — United States only
- Processing Time: 3–5 business days
- Estimated Delivery: 6–10 business days after dispatch
- Securely packed to protect your lighting fixtures during transit
- Tracking number sent via email once dispatched
- Orders over $250 require signature upon delivery. Taxes calculated at checkout.
Returns & Refund
Returns accepted within 30 days of delivery.
Damaged or Defective Item
Free return shipping + replacement or full refund
Wrong Item Received
Free return shipping + replacement or full refund
Change of Mind
Return shipping at customer's expense · Item must be unused & in original packaging
All returns require a Return Authorization (RA) number before sending.
View Full Return & Refund Policy
Safety & Compliance
⚠️
California Proposition 65 Warning
Some products sold on this website may expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
www.P65Warnings.ca.gov
⚡
Electrical Safety Warning
All electrical products must be installed by a qualified electrician in accordance with local wiring regulations. Incorrect installation may result in fire, electric shock, or injury.
Always disconnect power at the circuit breaker before installation.
💡
Bulb & Usage Advisory
Do not exceed the maximum wattage specified on the fixture label. Keep away from flammable materials. Allow adequate ventilation around the fixture.
Keep out of reach of children. Not suitable for wet locations unless rated IP65 or higher.
Guarantee safe checkout
10pcs 7W LED PCB Aluminum Plate with Lamp Beads 50mm for 7pcs 1W LED Beads Base with Lamp Beads for Lighting - Orange 600Nm / 7 Watt 50MM
$44.25
SPECIFICATIONS
Aluminum substrate thickness: 1mm
Average Life (hrs): 50000hrs LED Chip 1W Watt
Beam Angle: 120
Brand Name: Umaked
Certification: ce,CE,FCC,RoHS
Chip Size: 1W 30x30mil Epistar
Current: 300mA,1W 300-350Ma
Grow Light: Full Spectrum(400-840nm Deep Red(660nm) Royal Blue 445Nm
Grow Light 1: Amber 595NM Golden 585NM Orange 600NM
High-concerned chemical: none
InPut Voltage: DC 2.0-2.4v 3.0-3.4v
Item Type: Ball
Item name: YDXGJH 1W High Power led Chips+7 bit pcb
LED Chip Model: 1W High Power LED Chip
Length: 50mm
Model Number: UM-D-B-01
Origin: Mainland China
Power Tolerance: 1%
Shape: PCB Annular 50MM
Usage: Discoloration lamp, flashlight, ceiling lamp bead
Voltage: 3V
Wavelength: Warm Natura Cool White Red Green Blue Yellow
Production details:
• Portable flashlights and bicycle lights
• Stage lighting for entertainment decoration
• Guardrail lights, safety warning lights, garden lights
• Indoor and outdoor commercial and architectural lighting
• Car lights: headlights, angel eye lights, width lights, etc.
• No UV radiation
Operating voltage: each lamp beads about 3.0-3.5V (Please calculate the total number of beads according to the total voltage)
Lamp beads chip: Epistar 30mil 1w lamp beads
Light board circuit mode: both single and in series
board width: Annular 50MM
[Lighting angle] 120-140 degrees
[Working temperature] -20-60 degrees
[Storage temperature] 20-60 degrees
[Brightness attenuation] 3% after 5,000 hours of operation
[Life] 50,000 hours
anti-static
• Static electricity or high voltage can damage the lamp bead. When using the lamp bead, it is recommended to wear anti-static ring or anti-static gloves.
• When soldering iron, the machine is grounded; all drive equipment should be grounded to ensure that the lamp voltage is within the normal range.
Heat dissipation
• When the lamp is energized, the higher the current, the greater the heat generated by the lamp bead; the excessively high temperature will damage the lamp bead and the current needs to be controlled properly.
• Need to add heat sink and heat sink, the ambient temperature is controlled at 40~60°C
Take the lamp beads
• When taking the lamp beads, it is recommended to use tools such as tweezers.
• Try to avoid touching the surface of the lamp with your hands to prevent contamination of the lamp beads and affect the optical effect.
• Please take the lamp beads on the side
Enjoy Shopping
Thank you very much!
⚠️ WARNING (California Proposition 65):
This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
For more information, please visit www.P65Warnings.ca.gov.
Customer Approved
Extensive Selection
Fast, Reliable Delivery
